Production and properties of a new wood laminated veneer/high-density polyethylene composite board

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorLustosa, Emanuela Camargo de Barros-
Autor(es): dc.creatorDel Menezzi, Cláudio Henrique Soares-
Autor(es): dc.creatorMelo, Rafael Rodolfo de-
Data de aceite: dc.date.accessioned2024-10-23T16:38:13Z-
Data de disponibilização: dc.date.available2024-10-23T16:38:13Z-
Data de envio: dc.date.issued2017-12-07-
Data de envio: dc.date.issued2017-12-07-
Data de envio: dc.date.issued2015-09-
Fonte completa do material: dc.identifierhttp://repositorio.unb.br/handle/10482/29833-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1590/1516-1439.010615-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/913439-
Descrição: dc.descriptionThe paper aimed at evaluating the feasibility and the properties of a new product which combines wood veneer and high-density polyethylene (HDPE) from post-consuming plastic bags. Three HDPE amounts were evaluated: 150g/m2, 250 g/m2 e 350 g/m2. The boards were manufactured using a single-opening hot-press under such conditions: 140ºC, for 20 minutes and pressure of 1 N/mm2. It was found that the production of this kind of composite board is technically possible and relatively simple and they did not present any veneer delamination. The properties of the composite boards were quite similar or even higher to those found in LVL made using thermosetting resin. The higher the HDPE amount the higher the density of the composite board, which imparted significantly in mechanical properties. However, when the composite boards were evaluated under same density the effect of the HDPE amount affected only Janka hardness.-
Formato: dc.formatapplication/pdf-
Idioma: dc.languageen-
Publicador: dc.publisherABM, ABC, ABPol-
Direitos: dc.rightsAcesso Aberto-
Direitos: dc.rightsMaterials Research - This is an Open Access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0). Fonte: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392015000500994&lng=en&nrm=iso. Acesso em: 3 abr. 2018.-
Palavras-chave: dc.subjectLâminas de madeira-
Palavras-chave: dc.subjectSacolas plásticas-
Palavras-chave: dc.subjectReciclagem-
Título: dc.titleProduction and properties of a new wood laminated veneer/high-density polyethylene composite board-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional – UNB

Não existem arquivos associados a este item.