A low-cost filament winding technology for university laboratories and startups

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorAndrianov, Artem-
Autor(es): dc.creatorTomita, Erika Kamada-
Autor(es): dc.creatorVeras, Carlos Alberto Gurgel-
Autor(es): dc.creatorTelles, Bruno-
Data de aceite: dc.date.accessioned2024-10-23T16:24:51Z-
Data de disponibilização: dc.date.available2024-10-23T16:24:51Z-
Data de envio: dc.date.issued2022-08-01-
Data de envio: dc.date.issued2022-08-01-
Data de envio: dc.date.issued2022-03-07-
Fonte completa do material: dc.identifierhttps://repositorio.unb.br/handle/10482/44362-
Fonte completa do material: dc.identifierhttps://doi.org/10.3390/polym14051066-
Fonte completa do material: dc.identifierhttps://orcid.org/0000-0002-3987-6267-
Fonte completa do material: dc.identifierhttps://orcid.org/0000-0002-9668-953X-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/907845-
Descrição: dc.descriptionThis paper systematically explains the methodology and results of empirical work on the development of a low-cost filament winding technology for manufacturing axisymmetric polymer composite structures with a high length-to-diameter ratio, such as tubes, motor casings, and pressure vessels. The principal objective was to examine the experiences and most optimal practices in the development of computer-controlled equipment and auxiliary tooling for the wet filament-winding process. To preclude expensive commercial software for the automated control of a winding machine, analytical equations were derived for the winding trajectory of a four-axis filament-winding machine. The feasibility of the proposed equations was successfully validated by laying the fiber along the geodesic path marked on the surface of a cylindrical mandrel with hemispherical ends. Moreover, the carbon/epoxy cylindrical casings with hemispherical ends and port openings of the same diameter were wound to determine the thickness distribution in the hemispherical dome. The fiber volume ratio in the wound composite parts was evaluated using an optical technique.-
Descrição: dc.descriptionFaculdade UnB Gama (FGA)-
Formato: dc.formatapplication/pdf-
Publicador: dc.publisherMDPI-
Direitos: dc.rightsAcesso Aberto-
Direitos: dc.rightsCopyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).-
Palavras-chave: dc.subjectEnrolamento filamentar-
Palavras-chave: dc.subjectTrajetória sinuosa-
Palavras-chave: dc.subjectInvólucro composto-
Palavras-chave: dc.subjectPolímeros-
Título: dc.titleA low-cost filament winding technology for university laboratories and startups-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional – UNB

Não existem arquivos associados a este item.