Study of reinforcement distribution, adhesion between layers, and porosity induced by FDM

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorWernke, Arthur-
Autor(es): dc.creatorSantos, Rafael dos-
Autor(es): dc.creatorSantos, Leonardo-
Autor(es): dc.creatorBarcelos Júnior, Manuel-
Autor(es): dc.creatorLima, Emmanuel Pacheco Rocha-
Data de aceite: dc.date.accessioned2021-10-14T17:57:48Z-
Data de disponibilização: dc.date.available2021-10-14T17:57:48Z-
Data de envio: dc.date.issued2021-05-26-
Data de envio: dc.date.issued2021-05-26-
Data de envio: dc.date.issued2020-
Fonte completa do material: dc.identifierhttps://repositorio.unb.br/handle/10482/41025-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/620329-
Descrição: dc.descriptionThis study aims to understand the distribution of reinforcement material in the matrix, evaluate the adherence between layers, and determine the air gap between printing roads. We printed the specimen with two different composite materials, Polylactic Acid (PLA) reinforced with acrylic particles, and another filament reinforced with short carbon fibers. For the observations of the samples, we used a Confocal Microscope. We estimated the porosity of the material by comparing the expected mass with that achieved after manufacture. By pixel count, after binarization, we found the average percentage of acrylate particulate. They showed fair distribution through the PLA matrix even after the manufacturing process. The determination of fibers alignment was made by binarization of image, together with k-means and edge detection. This combination of methods allows estimating the fiber alignment by orientation straight lines. The manufacturing process did not offer good alignment of the fibers, even with the filament initially well aligned.-
Formato: dc.formatapplication/pdf-
Publicador: dc.publisherDavid Publishing-
Direitos: dc.rightsAcesso Aberto-
Direitos: dc.rights(CC BY NC) This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Fonte: http://www.davidpublisher.org/index.php/Home/Article/index?id=45467.html. Acesso em: 26 maio 2021.-
Palavras-chave: dc.subjectImpressão 3D-
Palavras-chave: dc.subjectPorosidade em peças impressas em 3D-
Palavras-chave: dc.subjectMateriais compostos impressos em 3D-
Título: dc.titleStudy of reinforcement distribution, adhesion between layers, and porosity induced by FDM-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional – UNB

Não existem arquivos associados a este item.