Physical, mechanical and thermal behavior of adobe stabilized with glass fiber reinforced polymer waste

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorGandia, Rômulo Marçal-
Autor(es): dc.creatorGomes, Francisco Carlos-
Autor(es): dc.creatorCorrêa, Andréa Aparecida Ribeiro-
Autor(es): dc.creatorRodrigues, Maykmiller Carvalho-
Autor(es): dc.creatorMendes, Rafael Farinassi-
Data de aceite: dc.date.accessioned2026-02-09T11:21:32Z-
Data de disponibilização: dc.date.available2026-02-09T11:21:32Z-
Data de envio: dc.date.issued2020-04-23-
Data de envio: dc.date.issued2020-04-23-
Data de envio: dc.date.issued2019-10-
Fonte completa do material: dc.identifierhttps://repositorio.ufla.br/handle/1/40290-
Fonte completa do material: dc.identifierhttps://www.sciencedirect.com/science/article/abs/pii/S0950061819315375#!-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/1139197-
Descrição: dc.descriptionThe polymer industry develops materials with excellent physical and mechanical properties but also with a large volume of waste with very low degradability. Therefore, the objective of this paper was to use glass fiber reinforced polymer (GFRP) waste in adobe production. Compositions varying from 0 to 10% mass residues were produced and evaluated in physical, mechanical and thermal tests. The addition of 10% GFRP waste showed the best results when compared to adobe without additives, demonstrated as follows: shrinkage reduction of 239%; bulk density reduction of 6%; thermal conductivity reduction of 21%; mass loss reduction when submerged in water; and compressive strength increase of 45%. Therefore, the use of GFRP residue is indicated in the manufacture of adobe to improve its physical, mechanical and thermal conductivity properties. In addition to providing a destination for a considerable quantity of the waste, the commercial value of the final product is higher due to using a residue with low degradability and high energy power due to burning during recycling.-
Idioma: dc.languageen-
Publicador: dc.publisherElsevier-
Direitos: dc.rightsrestrictAccess-
???dc.source???: dc.sourceConstruction and Building Materials-
Palavras-chave: dc.subjectNon conventional material-
Palavras-chave: dc.subjectSustainability-
Palavras-chave: dc.subjectResidue-
Palavras-chave: dc.subjectThermal comfort-
Palavras-chave: dc.subjectGFRP waste-
Palavras-chave: dc.subjectPolímeros-
Palavras-chave: dc.subjectMaterial não convencional-
Palavras-chave: dc.subjectResíduos-
Palavras-chave: dc.subjectConforto térmico-
Título: dc.titlePhysical, mechanical and thermal behavior of adobe stabilized with glass fiber reinforced polymer waste-
Tipo de arquivo: dc.typeArtigo-
Aparece nas coleções:Repositório Institucional da Universidade Federal de Lavras (RIUFLA)

Não existem arquivos associados a este item.