The influence of microstructure and mechanical resistance on the shape memory of ecae processed stainless Fe-Mn-Si-Cr-Ni-Co steel

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorKäfer, Karine Andrea-
Autor(es): dc.creatorBernardi, Heide Heloise-
Autor(es): dc.creatorSantos, Osmar de Sousa-
Autor(es): dc.creatorOtubo, Larissa-
Autor(es): dc.creatorLima, Nelson Batista de-
Autor(es): dc.creatorOtubo, Jorge-
Data de aceite: dc.date.accessioned2026-02-09T11:17:43Z-
Data de disponibilização: dc.date.available2026-02-09T11:17:43Z-
Data de envio: dc.date.issued2019-06-04-
Data de envio: dc.date.issued2019-06-04-
Data de envio: dc.date.issued2018-
Fonte completa do material: dc.identifierhttps://repositorio.ufla.br/handle/1/34596-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/1137804-
Descrição: dc.descriptionIn the current work, XRD, SEM, EBSD and TEM techniques were used to evaluate the microstructure of stainless Fe-Mn-Si-Cr-Ni-Co shape memory steel processed by ECAE and annealed for one hour at temperatures ranging from 650ºC to 950ºC. The results were then correlated with the mechanical and shape-memory properties of the steel. It was observed that the samples containing large grains and a microstructure free of defects or precipitates presented a high volume fraction of multi-variant thermal martensite and stress-induced martensite, resulting in good shape recovery, owing to the memory effect. The grain refinement and precipitation of second-phase particles decreased the volume fraction and number of martensite variants and considerably increased the mechanical resistance, enhancing the elastic shape recovery. It was shown that shape memory properties were essentially related to the mechanical resistance of the matrix, which in turn was related to the microstructure.-
Formato: dc.formatapplication/pdf-
Idioma: dc.languageen-
Direitos: dc.rightsAttribution 4.0 International-
Direitos: dc.rightsAttribution 4.0 International-
Direitos: dc.rightsacesso aberto-
Direitos: dc.rightshttp://creativecommons.org/licenses/by/4.0/-
Direitos: dc.rightshttp://creativecommons.org/licenses/by/4.0/-
???dc.source???: dc.sourceMaterials Research-
Palavras-chave: dc.subjectStainless shape memory steel-
Palavras-chave: dc.subjectEqual Channel Angular Extrusion (ECAE)-
Palavras-chave: dc.subjectGrain size-
Palavras-chave: dc.subjectSecond-phase particles-
Palavras-chave: dc.subjectMartensitic transformation-
Título: dc.titleThe influence of microstructure and mechanical resistance on the shape memory of ecae processed stainless Fe-Mn-Si-Cr-Ni-Co steel-
Tipo de arquivo: dc.typeArtigo-
Aparece nas coleções:Repositório Institucional da Universidade Federal de Lavras (RIUFLA)

Não existem arquivos associados a este item.