Static bending of glulam beams manufactured with rubber wood and epoxy adhesive

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorFaria, Douglas Lamounier-
Autor(es): dc.creatorLopes, Thamirys Andrade-
Autor(es): dc.creatorScatolino, Mário Vanoli-
Autor(es): dc.creatorSoriano, Julio-
Autor(es): dc.creatorMendes, Lourival Marin-
Autor(es): dc.creatorGuimarães Júnior, José Benedito-
Data de aceite: dc.date.accessioned2026-02-09T11:16:22Z-
Data de disponibilização: dc.date.available2026-02-09T11:16:22Z-
Data de envio: dc.date.issued2021-09-08-
Data de envio: dc.date.issued2021-09-08-
Data de envio: dc.date.issued2020-09-
Fonte completa do material: dc.identifierhttps://repositorio.ufla.br/handle/1/48073-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/1137324-
Descrição: dc.descriptionThe aim of this study was to evaluate the properties of Hevea brasiliensis wood wastes for production structural pieces of glued laminated (glulam) timber. Three trees with age close to 25 years and diameter at breast height (DBH) higher than 500 mm were obtained. The basic density of the wood were quantified, as well as the stiffness and the strength in static bending, shear strength and parallel compression to grain and hygroscopic equilibrium moisture. The beams of glulam were evaluated according to the modulus of elasticity (MOE), modulus of rupture (MOR) and delamination. Due to the bending properties MOR (75.14 MPa) and MOE (8166.79 MPa), as well as the shear strength (12.29 MPa) obtained, was concluded by the suitability of the rubber wood for the production of glulam beams. The composite beams presented values of MOR (75.14 MPa) and MOE (8166.79 MPa) compatible with species traditionally used in the production of glulam beams. The adhesive bond quality was verified by the delamination test, presenting delamination of 4.95 %, indicating its use for internal and external environments.-
Formato: dc.formatapplication/pdf-
Idioma: dc.languageen-
Publicador: dc.publisherUniversidade Federal do Rio de Janeiro/ Associação Brasileira do Hidrogênio (ABH2)-
Direitos: dc.rightsacesso aberto-
Direitos: dc.rightshttp://creativecommons.org/licenses/by/4.0/-
Direitos: dc.rightshttp://creativecommons.org/licenses/by/4.0/-
???dc.source???: dc.sourceRevista Matéria-
Palavras-chave: dc.subjectComposite-
Palavras-chave: dc.subjectWood-
Palavras-chave: dc.subjectBond resistance-
Palavras-chave: dc.subjectStatic bending-
Palavras-chave: dc.subjectLamínula-
Palavras-chave: dc.subjectAdesivo epóxi-
Palavras-chave: dc.subjectMadeira de borracha-
Palavras-chave: dc.subjectFlexão estática-
Título: dc.titleStatic bending of glulam beams manufactured with rubber wood and epoxy adhesive-
Tipo de arquivo: dc.typeArtigo-
Aparece nas coleções:Repositório Institucional da Universidade Federal de Lavras (RIUFLA)

Não existem arquivos associados a este item.