Batch sintering of FeO·OH and Fe2O3 blends : chemical and metallurgical characterization.

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.creatorPereira, Igor Jurandir Ubaldo Viana Pereira-
Autor(es): dc.creatorCoelho, Henrique Carvalho da Silva-
Autor(es): dc.creatorSantos, Cláudio Gouvêa dos-
Autor(es): dc.creatorBrocchi, Eduardo de Albuquerque-
Autor(es): dc.creatorSouza, Rodrigo Fernandes Magalhães de-
Autor(es): dc.creatorOliveira, Victor de Andrade Alvarenga-
Data de aceite: dc.date.accessioned2025-08-21T15:15:06Z-
Data de disponibilização: dc.date.available2025-08-21T15:15:06Z-
Data de envio: dc.date.issued2024-12-01-
Data de envio: dc.date.issued2024-12-01-
Data de envio: dc.date.issued2023-
Fonte completa do material: dc.identifierhttps://www.repositorio.ufop.br/handle/123456789/19244-
Fonte completa do material: dc.identifierhttps://doi.org/10.3390/met14050598-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/capes/1007943-
Descrição: dc.descriptionA sample of goethite iron ore sinter feed (G_SF) was employed as a raw material in a sintering bed. This sample partially replaced hematite sinter feed (H_SF), which is currently used as raw material in a sintering plant in the state of Minas Gerais, Brazil. This substitution did not adversely affect the chemical and metallurgical proprieties of the sinter mix product, provided that the utilization of G_SF was kept below 30% in weight. Despite the higher proportion of fines in G_SF, the presence of argillaceous minerals in the sample led to an improvement in the granulation index (GI) of the sinter mix product. The GI value increased from 68.4 to 82.7% for the experiments conducted without the presence of goethite ore and with 40% of goethite ore in the sintering mix, respectively. Consequently, the qualities of both the process and the produced sinter product were not compromised. The raw materials and the various sinters produced were characterized through X-ray fluorescence (XRF) and X-ray diffraction (XRD), as well as thermal gravimetric analysis (TGA). The XRD results were used to perform a quantitative assessment of the mineral phase using the Rietveld method (RM). This technique allowed for the determination of goethite content in the studied sample, which was 35.5%. Finally, the incorporation of G_SF in the sintering bed led to a 20% reduction in the cost of raw materials.-
Formato: dc.formatapplication/pdf-
Idioma: dc.languageen-
Direitos: dc.rightsaberto-
Direitos: dc.rightsThis article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/). Fonte: PDF do artigo.-
Palavras-chave: dc.subjectIronmaking-
Palavras-chave: dc.subjectIron ore-
Palavras-chave: dc.subjectGoethite-
Palavras-chave: dc.subjectHematite-
Palavras-chave: dc.subjectThermal analysis-
Título: dc.titleBatch sintering of FeO·OH and Fe2O3 blends : chemical and metallurgical characterization.-
Aparece nas coleções:Repositório Institucional - UFOP

Não existem arquivos associados a este item.