Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.creatorAlves, D. A.-
Autor(es): dc.creatorda Silva, LCP-
Autor(es): dc.creatorCastro, C. A.-
Autor(es): dc.creatorda Costa, V. F.-
Data de aceite: dc.date.accessioned2021-03-10T16:50:16Z-
Data de disponibilização: dc.date.available2021-03-10T16:50:16Z-
Data de envio: dc.date.issued2014-05-20-
Data de envio: dc.date.issued2014-05-20-
Data de envio: dc.date.issued2004-04-01-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1016/j.epsr.2003.08.009-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/9665-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/9665-
Descrição: dc.descriptionThe conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.-
Formato: dc.format93-104-
Idioma: dc.languageen-
Publicador: dc.publisherElsevier B.V.-
Relação: dc.relationElectric Power Systems Research-
Relação: dc.relation2.856-
Relação: dc.relation1,048-
Direitos: dc.rightsclosedAccess-
Palavras-chave: dc.subjectcontinuation power flow-
Palavras-chave: dc.subjectfast decoupled power flow-
Palavras-chave: dc.subjectmaximum loading point-
Palavras-chave: dc.subjectvoltage collapse-
Título: dc.titleParameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.