Analyzing PEO anodization time to monitor coatings phases, composition, morphology, thickness, and microhardness during the growth of TiO2 pores on the CP-Ti surface

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.contributorInstituto Latino-Americano de Ciências da Vida e da Natureza (ILACVN)-
Autor(es): dc.contributorUniversidade Federal de São Carlos (UFSCar)-
Autor(es): dc.creatorKuroda, Pedro A.B.-
Autor(es): dc.creatorCardoso, Giovana C.-
Autor(es): dc.creatorRossi, Mariana C.-
Autor(es): dc.creatorAfonso, Conrado R.M.-
Autor(es): dc.creatorGrandini, Carlos R.-
Data de aceite: dc.date.accessioned2025-08-21T21:26:32Z-
Data de disponibilização: dc.date.available2025-08-21T21:26:32Z-
Data de envio: dc.date.issued2025-04-29-
Data de envio: dc.date.issued2024-05-15-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1016/j.matlet.2024.136226-
Fonte completa do material: dc.identifierhttps://hdl.handle.net/11449/307133-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/307133-
Descrição: dc.descriptionThe objective of this study was to develop an oxide coating on commercially pure titanium using the plasma electrolytic oxidation (PEO) technique. During the surface treatment process, the time value was varied for 1, 10, 15, 30, 45, and 60 min. The PEO treatment was carried out at a limited current of 2.5 A and a voltage of 300 V. The coatings exhibit the anatase and rutile crystalline structures of TiO2. The coating produced for longer treatment times has higher concentrations of rutile, resulting in surface hardening. The thickness and the roughness of the coatings increased with the increase in treatment time, but there was a reduction in the size of the pores per unit area.-
Descrição: dc.descriptionUNESP – Univ. Estadual Paulista Laboratório de Anelasticidade e Biomateriais, SP-
Descrição: dc.descriptionUNILA – Universidade Federal da Integração Latino-Americana Instituto Latino-Americano de Ciências da Vida e da Natureza (ILACVN), PR-
Descrição: dc.descriptionUFSCar - Universidade Federal de São Carlos Materials Engineering Department, SP-
Descrição: dc.descriptionUNESP – Univ. Estadual Paulista Laboratório de Anelasticidade e Biomateriais, SP-
Idioma: dc.languageen-
Relação: dc.relationMaterials Letters-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectCP-Ti-
Palavras-chave: dc.subjectPEO-
Palavras-chave: dc.subjectSurface characterization-
Título: dc.titleAnalyzing PEO anodization time to monitor coatings phases, composition, morphology, thickness, and microhardness during the growth of TiO2 pores on the CP-Ti surface-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.