Structural and morphological modification of the PEO coating on the Ti-25Ta-10Zr-15Nb alloy through heat treatment

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUNILA – Universidade Federal da Integração Latino-Americana-
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.contributorUniversidade Federal de São Carlos (UFSCar)-
Autor(es): dc.creatorKuroda, Pedro A.B.-
Autor(es): dc.creatorCardoso, Giovana C.-
Autor(es): dc.creatorRossi, Mariana C.-
Autor(es): dc.creatorAfonso, Conrado R.M.-
Autor(es): dc.creatorGrandini, Carlos R.-
Data de aceite: dc.date.accessioned2025-08-21T20:33:51Z-
Data de disponibilização: dc.date.available2025-08-21T20:33:51Z-
Data de envio: dc.date.issued2025-04-29-
Data de envio: dc.date.issued2024-10-15-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1016/j.matlet.2024.137155-
Fonte completa do material: dc.identifierhttps://hdl.handle.net/11449/306320-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/306320-
Descrição: dc.descriptionThis study aims to produce a Plasma Electrolytic Oxidation (PEO) layer on the Ti-25Ta-10Zr-15Nb alloy (TTZN) and analyze the influence of heat treatment at different temperatures without a controlled atmosphere to promote thermal oxidation, and in a vacuum (10−7 Torr), to prevent oxidation. The results showed that the PEO coating was initially amorphous, and heat treatments promoted the formation of crystalline compounds. Raising the heat treatment temperature led to higher surface roughness in all conditions. The heat treatment under vacuum reduced thickness (9 → 4 μm), while the heat treatment in air promoted a thickness increasing (10 → 174 μm) and decreased the wettability (82 → 25°) of the oxide layer. Due to oxygen diffusion, there was an increase in the hardness of the TTZN alloy at the oxide/metal interface after heat treatment in the air (268 → 504 HV, 268 → 845 HV, and 268 → 1011 HV, at 800, 1000, and 1200 °C).-
Descrição: dc.descriptionCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)-
Descrição: dc.descriptionFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)-
Descrição: dc.descriptionConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)-
Descrição: dc.descriptionUNILA – Universidade Federal da Integração Latino-Americana, PR-
Descrição: dc.descriptionUNESP – Univ. Estadual Paulista Laboratório de Anelasticidade e Biomateriais, SP-
Descrição: dc.descriptionUFSCar - Universidade Federal de São Carlos Materials Engineering Department, SP-
Descrição: dc.descriptionUNESP – Univ. Estadual Paulista Laboratório de Anelasticidade e Biomateriais, SP-
Descrição: dc.descriptionCAPES: 001-
Descrição: dc.descriptionFAPESP: 2018/18293-8-
Descrição: dc.descriptionFAPESP: 2019/26517-6-
Descrição: dc.descriptionCNPq: 314.810/2021-8-
Descrição: dc.descriptionCNPq: 421.677/2023-6-
Descrição: dc.descriptionCNPq: 422015/2018-0-
Idioma: dc.languageen-
Relação: dc.relationMaterials Letters-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectPEO-
Palavras-chave: dc.subjectSurface characterization-
Palavras-chave: dc.subjectTTZN alloy-
Título: dc.titleStructural and morphological modification of the PEO coating on the Ti-25Ta-10Zr-15Nb alloy through heat treatment-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.