CHARACTERISTIC STRENGTHS IN THE COMPRESSION AND IN THE STATIC BENDING AS PARAMETERS TO ESTIMATE CHARACTERISTIC SHEAR STRENGTH FOR TIMBER DESIGN

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorInstituto Federal de Educação Ciência e Tecnologia do Ceará-
Autor(es): dc.contributorInstituto Federal de Santa Catarina-
Autor(es): dc.contributorUniversidade Federal de São Carlos (UFSCar)-
Autor(es): dc.contributorUniversidade Federal de São João DEl-Rei-
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.contributorUniversidade de São Paulo (USP)-
Autor(es): dc.creatorAlmeida, João Paulo Boff-
Autor(es): dc.creatorWolenski, Anderson Renato Vobornik-
Autor(es): dc.creatorRodrigues, Edson Fernando Castanheira-
Autor(es): dc.creatorde Araujo, Victor Almeida-
Autor(es): dc.creatorPanzera, Túlio Hallak-
Autor(es): dc.creatorde Campos, Cristiane Inácio-
Autor(es): dc.creatorMolina, Julio Cesar-
Autor(es): dc.creatorChristoforo, André Luis-
Autor(es): dc.creatorLahr, Francisco Antonio Rocco-
Data de aceite: dc.date.accessioned2025-08-21T20:49:35Z-
Data de disponibilização: dc.date.available2025-08-21T20:49:35Z-
Data de envio: dc.date.issued2025-04-29-
Data de envio: dc.date.issued2022-12-31-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1590/1806-908820230000008-
Fonte completa do material: dc.identifierhttps://hdl.handle.net/11449/305058-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/305058-
Descrição: dc.description– To simplify the characterization of wood species, the Brazilian standard document ABNT NBR 7190-1 (2022) establishes the determination of mechanical properties employing the characteristic strength in the compression parallel to grain (fc0,k). This mechanical property is estimated using the linear relation given by the following expression fv0,k = 0.12·fc0,k . Brazilian and European standard documents support the estimation of fv0,k using relations among properties. However, the European guidelines in the EN 384 (2019) have used the conventional characteristic strength in the static bending test (fM,k). Thus, this study aimed to investigate the efficiency of the ratio fv0,k = 0.12·fc0,k for adopting 30 hardwoods. The variance analysis results demonstrate the divergence among the experimental outcomes and those values estimated using the relation cited. Therefore, regression models at two parameters were considered to obtain more accurate estimates of fv0,k by adopting fc0,k, and fM,k as independent variables. Regarding the results, the geometric (R2 = 80.80%) and linear (R² = 74.19%) models were the most accurate for the estimates of fv0,k in terms of fc0,k, and fM,k, respectively. This fact evinces the good accuracy of the models under consideration, which may provide a more rigorous structural design compared to the correlation currently prescribed by the ABNT NBR 7190-1 (2022).-
Descrição: dc.descriptionInstituto Federal de Educação Ciência e Tecnologia do Ceará, CE-
Descrição: dc.descriptionInstituto Federal de Santa Catarina Departamento de Construção Civil, SC-
Descrição: dc.descriptionUniversidade Federal de São Carlos Programa de Pós-Graduação em Engenharia Civil, SP-
Descrição: dc.descriptionUniversidade Federal de São João DEl-Rei Departamento de Engenharia Mecânica, MG-
Descrição: dc.descriptionUniversidade Estadual Júlio de Mesquita Filho Departamento de Ciências e Tecnologia, SP-
Descrição: dc.descriptionUniversidade de São Paulo Departamento de Engenharia de Estruturas, SP-
Descrição: dc.descriptionUniversidade Estadual Júlio de Mesquita Filho Departamento de Ciências e Tecnologia, SP-
Idioma: dc.languageen-
Relação: dc.relationRevista Arvore-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectBrazilian hardwood-
Palavras-chave: dc.subjectcharacteristic strengths-
Palavras-chave: dc.subjectShear strength estimates-
Título: dc.titleCHARACTERISTIC STRENGTHS IN THE COMPRESSION AND IN THE STATIC BENDING AS PARAMETERS TO ESTIMATE CHARACTERISTIC SHEAR STRENGTH FOR TIMBER DESIGN-
Título: dc.titleRESISTÊNCIAS CARACTERÍSTICAS NA COMPRESSÃO E FLEXÃO ESTÁTICA COMO PARÂMETROS PARA A ESTIMATIVA DA RESISTÊNCIA CARACTERÍSTICA AO CISALHAMENTO NO PROJETO DE MADEIRA-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.