Effects of Curing Temperature and Silica Content on the Structure and Properties of a Sol-Gel PU-Silica Hybrid Coating for Corrosion Protection

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.creatorBraz, AlvaroG.-
Autor(es): dc.creatorPochapski, Daniel J.-
Autor(es): dc.creatorPulcinelli, Sandra H.-
Autor(es): dc.creatorSantilli, Celso V.-
Data de aceite: dc.date.accessioned2025-08-21T22:40:26Z-
Data de disponibilização: dc.date.available2025-08-21T22:40:26Z-
Data de envio: dc.date.issued2025-04-29-
Data de envio: dc.date.issued2023-07-14-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1021/acsaenm.3c00148-
Fonte completa do material: dc.identifierhttps://hdl.handle.net/11449/303973-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/303973-
Descrição: dc.descriptionAdjustments of the curing temperature and silica content were used to improve the corrosion protection properties of an organic-inorganic hybrid (OIH) coating based on a polyurethane-silica (SPU) system. Fourier transform infrared and nuclear magnetic resonance (C-13 and Si-29 NMR) spectroscopy analyses revealed the conversion of urethane groups to secondary amines, with concomitant condensation of Si-R to Si-O-Si, when the curing temperature was increased, while small-angle X-ray scattering analysis showed the formation of denser and less branched aggregates of the inorganic framework. The silica content influenced the roughness and thickness of the coatings, with values in the ranges 1.6-9.6 nm and 1.7-6.5 mu m, respectively. All the hybrid coatings deposited on steel presented impedance modulus at the lowest frequency (|Z(5)|) above 0.1 G Omega cm(2) throughout the 28 days of analysis. The SPU coating prepared using a TEOS/APTES ratio of 1 and a curing temperature of 167 degrees C presented the best performance as a corrosion protection barrier, characterized by predominant capacitive behavior and the invariance of |Z(5)| over 10 G Omega cm(2).-
Descrição: dc.descriptionPROPe UNESP-
Descrição: dc.descriptionConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)-
Descrição: dc.descriptionFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)-
Descrição: dc.descriptionCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)-
Descrição: dc.descriptionSao Paulo State Univ UNESP, Inst Chem, BR-14800060 Araraquara, SP, Brazil-
Descrição: dc.descriptionSao Paulo State Univ UNESP, Inst Chem, BR-14800060 Araraquara, SP, Brazil-
Descrição: dc.descriptionCNPq: 304592/2019-6-
Descrição: dc.descriptionCNPq: 309419/2020-4-
Descrição: dc.descriptionFAPESP: 2014/50948-3-
Descrição: dc.descriptionCAPES: 001-
Formato: dc.format1739-1751-
Idioma: dc.languageen-
Publicador: dc.publisherAmer Chemical Soc-
Relação: dc.relationAcs Applied Engineering Materials-
???dc.source???: dc.sourceWeb of Science-
Palavras-chave: dc.subjectPU-silica hybrid-
Palavras-chave: dc.subjectsol-gel process-
Palavras-chave: dc.subjectcorrosionprotection coating-
Palavras-chave: dc.subjectprocessing parameters-
Palavras-chave: dc.subjectsilicacontent-
Palavras-chave: dc.subjectstructural properties-
Título: dc.titleEffects of Curing Temperature and Silica Content on the Structure and Properties of a Sol-Gel PU-Silica Hybrid Coating for Corrosion Protection-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.