Direct determination of Al, As, Cu, Fe, Mn, and Ni in fuel ethanol by simultaneous GFAAS using integrated platforms pretreated with W-Rh permanent modifier together with Pd+Mg modifier

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.contributorUniv. Federal do Rio Grande do Sul-
Autor(es): dc.creatorDe Oliveira, Adriana Paiva-
Autor(es): dc.creatorDe Moraes, Mercedes-
Autor(es): dc.creatorGomes Neto, José Anchieta-
Autor(es): dc.creatorLima, Eder Cláudio-
Data de aceite: dc.date.accessioned2025-08-21T15:59:06Z-
Data de disponibilização: dc.date.available2025-08-21T15:59:06Z-
Data de envio: dc.date.issued2022-04-29-
Data de envio: dc.date.issued2022-04-29-
Data de envio: dc.date.issued2002-11-01-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/231705-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/231705-
Descrição: dc.descriptionA method is proposed for the simultaneous determination of Al, As, Cu, Fe, Mn, and Ni in fuel ethanol by electrothermal atomic absorption spectrometry (ETAAS) using W-Rh permanent modifier together with Pd(NO3)2 + Mg(NO3)2 conventional modifier. The integrated platform of a transversely heated graphite atomizer (THGA) was treated with tungsten, followed by rhodium, forming a deposit containing 250 μg W + 200 μg Rh. A 500-μL volume of fuel ethanol was diluted with 500 μL of 0.14 mol L-1 HNO3 in an autosampler cup of the spectrometer. Then, 20 μL of the diluted ethanol was introduced into the pretreated graphite platform followed by the introduction of 5 μg Pd(NO3)2+ 3 μg Mg(NO3)2. The injection of this modifier was required to improve arsenic and iron recoveries in fuel ethanol. Calibrations were carried out using multi-element reference solutions prepared in diluted ethanol (1+1, v/v) acidified to 0.14 mol L-1 HNO3. The pyrolysis and atomization temperatures of the heating program were 1200°C and 2200°C, respectively, which were obtained with multielement reference solutions in acidic diluted ethanol (1+1, v/v; 0.14 mol L-1 HNO3). The characteristic masses for the simultaneous determination in ethanol fuel were 78 pg Al, 33 pg As, 10 pg Cu, 14 pg Fe, 7 pg Mn, and 24 pg Ni. The lifetime of the pretreated tube was about 700 firings. The detection limits (D.L.) were 1.9 μg L-1 Al, 2.9 μg L-1 As, 0.57 μg L-1 Cu, 1.3 μg L-1 Fe, 0.40 μg L-1 Mn, and 1.3 μg L-1 Ni. The relative standard deviations (n = 12) were 4%, 4%, 3%, 1.5%, 1.2%, and 2.2% for Al, As, Cu, Fe, Mn, and Ni, respectively. The recoveries of Al, As, Cu, Fe, Mn, and Ni added to the fuel ethanol samples varied from 81% to 95%, 80% to 98%, 97% to 109%, 85% to 107%, 98% to 106% and 97% to 103%, respectively. Accuracy was checked for the Al, As, Cu, Fe, Mn, and Ni determination in 10 samples purchased at a local gas station in Araraquara-SP City, Brazil. A paired t-test showed that at the 95% confidence level the results were in agreement with those obtained by single-element ETAAS.-
Descrição: dc.descriptionInstituto de Química Universidade Estadual Paulista, P.O. Box 355, 14801-970 Araraquara-SP-
Descrição: dc.descriptionDepartamento de Quimica Analitica Univ. Federal do Rio Grande do Sul, P.O. Box 15003, 91501-970 Porto Alegre-RS-
Descrição: dc.descriptionInstituto de Química Universidade Estadual Paulista, P.O. Box 355, 14801-970 Araraquara-SP-
Formato: dc.format190-195-
Idioma: dc.languageen-
Relação: dc.relationAtomic Spectroscopy-
???dc.source???: dc.sourceScopus-
Título: dc.titleDirect determination of Al, As, Cu, Fe, Mn, and Ni in fuel ethanol by simultaneous GFAAS using integrated platforms pretreated with W-Rh permanent modifier together with Pd+Mg modifier-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.