CO2 adsorption of bagasse waste feedstock using thermogravimetric analyses

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.creatorPeres, Christiano Bruneli [UNESP]-
Autor(es): dc.creatorRosa, André Henrique [UNESP]-
Autor(es): dc.creatorde Morais, Leandro Cardoso [UNESP]-
Data de aceite: dc.date.accessioned2022-08-04T22:09:57Z-
Data de disponibilização: dc.date.available2022-08-04T22:09:57Z-
Data de envio: dc.date.issued2022-04-28-
Data de envio: dc.date.issued2022-04-28-
Data de envio: dc.date.issued2020-12-31-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1007/s10973-021-10949-2-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/221834-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/221834-
Descrição: dc.descriptionNowadays, global warming is mainly caused by increase in CO2 concentration in the environment; to mitigate this problem, an attractive strategy for efficient CO2 emission reduction was applied: carbon capture. Therefore, this work had as main objective to measure the capture of CO2, through two carbonaceous materials produced from sugar cane bagasse; this biochar was activated chemically with KOH, by two different processes: the impregnated biochar (CA-1) was taken to pyrolysis process at 350 °C and another sugarcane bagasse sample was also impregnated, but directly in dry biomass (CA-2), obtaining two carbonaceous material (CA-1 and CA-2), respectively. The prepared carbons were characterized by thermal analysis with heating rate of 10 °C min−1 in N2 atmosphere, showing two main stages: the first one close to 150 °C for biochar samples and the second one in the range of 150–600 °C for the same biochar samples, X-ray diffraction (XRD, peaks at 2θ = 28.41°; 40.50°; 44.52°; 50.29° and 58.61° for CA-1 and 2θ = 28.27°; 40.45°; 44.60°; 50.15° and 58.63° for CA-2), scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) and Fourier transform infrared spectroscopy (FTIR, showing peaks at 3675, 2926, 1559, 1364, 1026 and 916 cm−1 for the biochar samples). CO2 capture was performed by thermogravimetric running test. The samples showed similar physico-chemical characteristics, but the CA-2 sample showed better adsorption performance (1.22 mmol CO2 g−1). Heat treatment in an inert atmosphere and chemical activation of biomass are recommended for obtaining carbonaceous material for use in carbon dioxide adsorption processes.-
Descrição: dc.descriptionInstitute of Science and Technology São Paulo State University (UNESP) “Júlio de Mesquita Filho” – Sorocaba Campus, Av. Três de Março, 511, Alto da Boa Vista, Sorocaba-
Descrição: dc.descriptionInstitute of Science and Technology São Paulo State University (UNESP) “Júlio de Mesquita Filho” – Sorocaba Campus, Av. Três de Março, 511, Alto da Boa Vista, Sorocaba-
Idioma: dc.languageen-
Relação: dc.relationJournal of Thermal Analysis and Calorimetry-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectCarbonaceous material-
Palavras-chave: dc.subjectCO2 capture-
Palavras-chave: dc.subjectTG/DTG-
Palavras-chave: dc.subjectThermochemical activation-
Título: dc.titleCO2 adsorption of bagasse waste feedstock using thermogravimetric analyses-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.