Use of ceramic sanitaryware as an alternative for the development of new sustainable binders

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversitat Jaume I-
Autor(es): dc.contributorUniversitat Politècnica de València-
Autor(es): dc.contributorUniversidade de São Paulo (USP)-
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.creatorReig, Lucía-
Autor(es): dc.creatorBorrachero, María V.-
Autor(es): dc.creatorMonzó, José M.-
Autor(es): dc.creatorSavastano, Holmer-
Autor(es): dc.creatorTashima, Mauro M. [UNESP]-
Autor(es): dc.creatorPayá, Jordi-
Data de aceite: dc.date.accessioned2022-08-04T22:05:15Z-
Data de disponibilização: dc.date.available2022-08-04T22:05:15Z-
Data de envio: dc.date.issued2022-04-28-
Data de envio: dc.date.issued2022-04-28-
Data de envio: dc.date.issued2016-01-01-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/KEM.668.172-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/220535-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/220535-
Descrição: dc.descriptionLarge amounts of ceramic sanitary-ware waste are generated in both the production process and construction and demolition practices. This waste contains amorphous phases that may react with the Portlandite that originates during Portland cement hydration or with an alkali solution, leading to a low CO2-binding material. This study investigated the pozzolanic activity of ceramic sanitary-ware waste, together with its potential to form new binders by alkali activation. For this purpose, raw material was characterized by X-ray diffraction, X-ray fluorescence, particle size distribution, thermogravimetry (TGA) and scanning electron microscopy (SEM). Percentages of ceramic waste of 15 wt.% and 25 wt.%, to replace Portland cement, were used to assess the pozzolanic behavior of this material, and samples were cured at 20C for different curing times. Alkali-activated samples, in which Ca(OH)2 was used as a source of calcium, and NaOH and sodium silicate solutions were utilized as activators, were cured for 7 days at 65C. The microstructural evolution of the developed binders was assessed in pastes by SEM and TGA analyses, and mortars were used to evaluate the compressive strength behavior. While some strength gain was observed due to pozzolanic activity, compressive strength values within the 14-36 MPa range were obtained in the alkali-activated mortars in accordance with the activator concentration and the percentage of Ca(OH)2 addition.-
Descrição: dc.descriptionDepartment of Mechanical and Building Engineering Universitat Jaume I-
Descrição: dc.descriptionScience and Technology Concrete Institute Universitat Politècnica de València-
Descrição: dc.descriptionDepartment of Biosystems Engineering University of São Paulo-
Descrição: dc.descriptionDepartment of Civil Engineering Universidade Estadual Paulista-
Descrição: dc.descriptionDepartment of Civil Engineering Universidade Estadual Paulista-
Formato: dc.format172-180-
Idioma: dc.languageen-
Relação: dc.relationKey Engineering Materials-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectAlkali activation-
Palavras-chave: dc.subjectCeramic waste-
Palavras-chave: dc.subjectMechanical strength-
Palavras-chave: dc.subjectPozzolan-
Título: dc.titleUse of ceramic sanitaryware as an alternative for the development of new sustainable binders-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.