Wear evaluation of an AISI 1020 steel coated with PEEK

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade de São Paulo (USP)-
Autor(es): dc.contributorSchaeffler Group Brazil Ltda-
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.creatorPereira, Ricardo Gomes-
Autor(es): dc.creatorFernandes, Frederico Augusto Pires-
Autor(es): dc.creatorSirbone, Fabio Renato Camargo-
Autor(es): dc.creatorDe Oliveira Santos Neto, Antídio-
Autor(es): dc.creatorCasteletti, Luiz Carlos [UNESP]-
Data de aceite: dc.date.accessioned2022-08-04T22:03:42Z-
Data de disponibilização: dc.date.available2022-08-04T22:03:42Z-
Data de envio: dc.date.issued2022-04-28-
Data de envio: dc.date.issued2022-04-28-
Data de envio: dc.date.issued2010-12-01-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/220051-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/220051-
Descrição: dc.descriptionPEEK (Poly-ether-ether-ketone) coatings have been attracted interest from some industry sectors due to its good wear resistance. In this study the wear resistance of a AISI 1020 steel coated with PEEK it was compared with that the AISI 52100 steel quenched and tempered to a hardness of 60HRc. The wear tests were performed in a fixed-ball micro-wear machine, using three different loads in the dry condition and using a lubricant. It was found that the PEEK coating presented a better wear performance than the AISI 52100 steel in dry condition and a wear performance close to the lubricated AISI 52100 steel while the PEEK layer maintains its integrity. In the case of the lubricated tests, the AISI 52100 steel provided the best performance among the samples tested. Copyright © (2010) by Associação Brasileira de Metalurgia Materiais e Mineração (ABM).-
Descrição: dc.descriptionUSP, S̃o-Carlos-
Descrição: dc.descriptionEESC-USP, S̃o-Carlos-
Descrição: dc.descriptionSchaeffler Group Brazil Ltda, Sorocaba-
Descrição: dc.descriptionUNESP, Sorocaba-
Descrição: dc.descriptionUNESP, Sorocaba-
Formato: dc.format4457-4462-
Idioma: dc.languageen-
Relação: dc.relation65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectCoating-
Palavras-chave: dc.subjectPEEK (poly-ether-ether-ketone)-
Palavras-chave: dc.subjectWear-
Título: dc.titleWear evaluation of an AISI 1020 steel coated with PEEK-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.