Improving the reactivity of a former ground sugarcane bagasse ash produced by autogenous combustion through employment of two different additional grinding procedures

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorInstituto Tecnológico de Aeronáutica (ITA)-
Autor(es): dc.contributorUniversidade Estadual do Norte Fluminense Darcy Ribeiro (UENF)-
Autor(es): dc.contributorUniversidade Estadual Paulista (Unesp)-
Autor(es): dc.contributorUniversidade Federal do Rio de Janeiro (UFRJ)-
Autor(es): dc.contributorUniversitat Politècnica de València-
Autor(es): dc.creatorMoraes, J. C.B.-
Autor(es): dc.creatorCordeiro, G. C.-
Autor(es): dc.creatorAkasaki, J. L. [UNESP]-
Autor(es): dc.creatorVieira, A. P.-
Autor(es): dc.creatorPayá, J.-
Data de aceite: dc.date.accessioned2022-02-22T00:44:39Z-
Data de disponibilização: dc.date.available2022-02-22T00:44:39Z-
Data de envio: dc.date.issued2021-06-25-
Data de envio: dc.date.issued2021-06-25-
Data de envio: dc.date.issued2021-02-07-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1016/j.conbuildmat.2020.121471-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/205563-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/205563-
Descrição: dc.descriptionStudies on reactivity of sugarcane bagasse ash (SCBA), obtained by an autogenous combustion process, with low loss on ignition and three different particle sizes were carried out (SCBA-1, SCBA-2 and SCBA-3). The ashes were characterized by their particle size distribution, chemical composition, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and field emission scanning electron microscopy (FESEM). The ash with lowest particle size was SCBA-3, followed by SCBA-2, which both were finer than SCBA-1. Calcium hydroxide/SCBA blends were assessed by means of loss of electrical conductivity (Lc), TGA and FESEM. Portland cement/SCBA pastes were analyzed through isothermal calorimetry, TGA, FESEM and compressive strength. Results showed that SCBA with lowest particle size (SCBA-3) presented highest reactivity, which resulted in statically significant better compressive strength than that of control paste (with only Portland cement) after 28 days of curing. The improvement on compressive strength by employing SCBA-3 respect to control and SCBA-1 were 17.9 and 14.1%, respectively, after 180 days of curing.-
Descrição: dc.descriptionFundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ)-
Descrição: dc.descriptionCivil Engineering Division Instituto Tecnológico de Aeronáutica (ITA)-
Descrição: dc.descriptionLaboratory of Civil Engineering Universidade Estadual do Norte Fluminense Darcy Ribeiro (UENF)-
Descrição: dc.descriptionMAC Grupo de Pesquisa em Materiais Alternativos de Construção Faculdade de Engenharia de Ilha Solteira Universidade Estadual Paulista (UNESP)-
Descrição: dc.descriptionDepartment of Civil Engineering Universidade Federal do Rio de Janeiro (COPPE/UFRJ)-
Descrição: dc.descriptionGIQUIMA Group Grupo de Investigación en Química de los Materiales de Construcción ICITECH Instituto de Ciencia y Tecnología del Hormigón Universitat Politècnica de València-
Descrição: dc.descriptionMAC Grupo de Pesquisa em Materiais Alternativos de Construção Faculdade de Engenharia de Ilha Solteira Universidade Estadual Paulista (UNESP)-
Idioma: dc.languageen-
Relação: dc.relationConstruction and Building Materials-
???dc.source???: dc.sourceScopus-
Palavras-chave: dc.subjectCalcium hydroxide/pozzolan paste-
Palavras-chave: dc.subjectCompressive strength test-
Palavras-chave: dc.subjectMicrostructural study-
Palavras-chave: dc.subjectPortland cement/pozzolan paste-
Palavras-chave: dc.subjectPozzolan characterization-
Título: dc.titleImproving the reactivity of a former ground sugarcane bagasse ash produced by autogenous combustion through employment of two different additional grinding procedures-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.