Use of soybean hulls for the production of conventional panels of low density agglomerates

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Federal de Goiás (UFG)-
Autor(es): dc.contributorUniversidade Federal de Lavras (UFLA)-
Autor(es): dc.contributorUniversidade Estadual Paulista (Unesp)-
Autor(es): dc.creatorGuimaraes, Ingrid Luz-
Autor(es): dc.creatorRamos de Araujo Veloso, Maria Cecillia-
Autor(es): dc.creatorNogara Lisboa, Fernando Jesus [UNESP]-
Autor(es): dc.creatorMendes, Rafael Farinassi-
Autor(es): dc.creatorMendes, Lourival Marin-
Autor(es): dc.creatorFarrapo, Camila Lais-
Autor(es): dc.creatorGuimaraes Junior, Jose Benedito-
Data de aceite: dc.date.accessioned2022-02-22T00:04:24Z-
Data de disponibilização: dc.date.available2022-02-22T00:04:24Z-
Data de envio: dc.date.issued2020-12-09-
Data de envio: dc.date.issued2020-12-09-
Data de envio: dc.date.issued2019-01-01-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.5039/agraria.v14i2a5643-
Fonte completa do material: dc.identifierhttp://hdl.handle.net/11449/194961-
Fonte: dc.identifier.urihttp://educapes.capes.gov.br/handle/11449/194961-
Descrição: dc.descriptionWood accounts for more than 40% of the production cost of clad of aglomerates panels and to meet industry demand and reduces the production costs of panels, the use of agro-industrial waste is an alternative. In this sense, the objective of this work was to evaluate the effect of the substitution of wood by soybean hull on the physical and mechanical properties of the panels. The panels were produced with a nominal density of 0.60 g cm(-3). It replaced the percentages of 0, 25, 50, 75 and 100% of soybean hulls in relation to the eucalyptus particles. The particles were glued with 12% of the urea-formaldehyde. The pressing cycle comprised a pressure of 4.0 MPa and a temperature of 180 degrees C for 15 minutes. The results showed that the conventional agglomerated panels produced with soybean residue showed an increase in their physical properties and a reduction of the mechanics as the replacement of the wood by residue was increased. It is concluded that, from the technical point of view, the physical and mechanical properties are met with a maximum substitution of the wood per soybean residue in the proportion of 28.9%.-
Descrição: dc.descriptionUniv Fed Goias, Campus Samambaia, Goiania, Go, Brazil-
Descrição: dc.descriptionUniv Fed Lavras, Lavras, MG, Brazil-
Descrição: dc.descriptionUniv Estadual Paulista, Botucatu, SP, Brazil-
Descrição: dc.descriptionUniv Estadual Paulista, Botucatu, SP, Brazil-
Formato: dc.format6-
Idioma: dc.languagept_BR-
Publicador: dc.publisherUniv Federal Rural Pernambuco-
Relação: dc.relationRevista Brasileira De Ciencias Agrarias-agraria-
???dc.source???: dc.sourceWeb of Science-
Palavras-chave: dc.subjectsoybean hulls-
Palavras-chave: dc.subjectbonded plates-
Palavras-chave: dc.subjectEucalyptus-
Palavras-chave: dc.subjectlignocellulosic material-
Título: dc.titleUse of soybean hulls for the production of conventional panels of low density agglomerates-
Tipo de arquivo: dc.typelivro digital-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.