Microstructural, dielectric and ferroelectric properties of calcium-modified lead titanate thin films derived by chemical processes

Registro completo de metadados
MetadadosDescriçãoIdioma
Autor(es): dc.contributorUniversidade Estadual Paulista (UNESP)-
Autor(es): dc.creatorPontes, DSL-
Autor(es): dc.creatorLeite, E. R.-
Autor(es): dc.creatorPontes, F. M.-
Autor(es): dc.creatorLongo, Elson-
Autor(es): dc.creatorVarela, José Arana-
Data: dc.date2014-05-20T15:21:22Z-
Data: dc.date2014-05-20T15:21:22Z-
Data: dc.date2001-08-01-
Data de aceite: dc.date.accessioned2014-11-17T16:52:28Z-
Data de disponibilização: dc.date.available2014-11-17T16:52:28Z-
Data de envio: dc.date.issued2014-11-17-
Fonte completa do material: dc.identifierhttp://dx.doi.org/10.1016/S0955-2219(00)00307-1-
Fonte completa do material: dc.identifierJournal of the European Ceramic Society. Oxford: Elsevier B.V., v. 21, n. 8, p. 1107-1114, 2001.-
Fonte completa do material: dc.identifier0955-2219-
Fonte completa do material: dc.identifierhttp://base.repositorio.unesp.br/handle/11449/32530-
Fonte completa do material: dc.identifier10.1016/S0955-2219(00)00307-1-
Fonte completa do material: dc.identifierWOS:000169252500015-
Fonte: dc.identifier.urihttp://www.educapes.capes.gov.br/handle/capes/58627-
Fonte: dc.identifier.urihttp://www.educapes.capes.gov.br/handlecapes/58627-
Descrição: dc.descriptionFerroelectric Pb1-xCaxTiO3 (x = 0.24) thin films were formed on a Pt/Ti/SiO2/Si substrate by the polymeric precursor method using the dip-coating technique for their deposition. Characterization of the films bq X-ray diffraction showed a perovskite single phase with a tetragonal structure after annealing at 700 degreesC. Atomic force microscopy (AFM) analyses showed that the film had a smooth and crack-free surface with low surface roughness. In addition, the PCT thin film had a granular structure with an 80 nm grain size. The thickness of the films observed by the scanning electron microscopy (SEM) is 550 nm and there is a good adhesion between the film and substrate. For the electrical measurements metal-ferroelectric-metal of the type capacitors were obtained, where the thin films showed good dielectric and ferroelectric properties. The dielectric constant and dissipation factor at 1 kHz and measured at room temperature were found to be 457 and 0.03. respectively. The remanent polarization and coercive field for the: deposited films were P-r = 17 muC/cm(2) and E-c = 75 kV/cm, respectively. Moreover. The 550-nm-thick film showed a current density in the order of 10(-8) A/cm(2) at the applied voltage of 2 V. The high values of the thin film's dielectric properties are attributed to its excellent microstructural quality and the chemical homogeneity obtained by the polymeric precursor method. (C) 2001 Elsevier science Ltd. All rights reserved.-
Formato: dc.format1107-1114-
Idioma: dc.languageeng-
Publicador: dc.publisherElsevier B.V.-
Relação: dc.relationJournal of the European Ceramic Society-
Direitos: dc.rightsclosedAccess-
Palavras-chave: dc.subjectferroelectric properties-
Palavras-chave: dc.subjectfilms-
Palavras-chave: dc.subject(Pb, Ca)TiO3-
Palavras-chave: dc.subjectprecursors-
Palavras-chave: dc.subjectprecursors-organic-
Título: dc.titleMicrostructural, dielectric and ferroelectric properties of calcium-modified lead titanate thin films derived by chemical processes-
Tipo de arquivo: dc.typeoutro-
Aparece nas coleções:Repositório Institucional - Unesp

Não existem arquivos associados a este item.